Operational temperature range from -60°C to +300°C continuous, +350°C intermittent

• Fire retardant synthetic silicone moulded components which do not support the surface spread of flame
• Accurate threads mean easy fitting
• Provides an unrivalled level of cushioning and support
• Wide range of standard sizes:
• Easy identification: Yellow

Stainless steel pipes O/Ds of pipes are based on BS 3974 Part 1 1974 Table 10.

TICO VHT Pipe Support is based on Silicone rubber. Specialised compounding has allowed this product to maintain high levels of flexibility, after severe heat ageing tests.

TICO VHT Pipe Support is ideally suited for applications where temperatures may be expected to range from –60°C to +300°C continuous, +350°C intermittent. The Pipe Support is also resistant to a wide range of oils and environmental conditions.

TICO VHT has been independently tested for UV protection (ASTM G154) and water uptake (ASTM D471). The material prevents electrolytic action between dissimilar metals, which can lead to corrosion.

TICO (Grip Type) Pipe Supports or Clamps have been specifically designed to minimise vibration transmission between pipework and hanger, and also preventing corrosion between dissimilar metals. Configuration enables the pipe to be gripped and supported while accommodating small axial and torsional movements of the pipe.

• Pipe is fully isolated from its support to prevent electrolytic corrosion
• Prevents clamping damage to the pipes during installation
• Also prevents wear due to fretting
• Reduction in the transmission of noise and vibration
• Maintenance free and long service life
• Easy to install

For the stainless steel pipes O/Ds of pipes are based on BS 3974 Part 1 1974 Table 10.

The TICO Industrial Pipe Support/Clamp family of products consists of Pipe Supports or Pipe Clamps, Clip Strips, Clamp Blocks and Bond slips. TICO Pipe Support/Clamp products perform a number of varied functions, which include:

1. Supporting and positively locating pipework over long spans.

2. Isolating the pipe from the mounting bolts and clamps to prevent fretting and corrosion.

3. Isolating dissimilar metals (e.g. between a pipe and a clamp) to prevent electrolytic corrosion.

4. Cater for movements in the pipe due to e.g. thermal expansion and contraction which might otherwise result in a build-up of stress in the pipe and potential rupture.

5. Maintaining pipe spacing of multiple pipe runs over long spans.

Two size types available with ranges based on different types of thin walled pipe:

JW 152 Series

Sizes based on stainless steel pipe outer diameters to BS3974 Part 1 1974

Rubber sleeve and pad color coded Black

JW 153 Series

Sizes based on Cu-Ni pipe outer diameters to BS2871 Part 2

Rubber sleeve and pad color coded Red

TICO Pipe Supports/Clamps have been specifically designed to minimize vibration transmission between pipework and hanger, and also preventing corrosion between dissimilar metals. Configuration enables the pipe to be gripped and supported while accommodating larger axial and torsional movements of the pipe.

Pipe is fully isolated from its support to prevent electrolytic corrosion

• Prevents clamping damage to the pipes during installation
• Also prevents wear due to fretting
• Reduction in the transmission of noise and vibration
• Maintenance free and long service life
• Easy to install

For Stainless Steel Pipes

For the stainless steel pipes O/Ds of pipes are based on BS 3974 Part 1 1974 Table 10.

More Details

The TICO Industrial Pipe Support family of products consists of Pipe Grips, Clip Strips, Clamp Blocks and Bondslips. TICO Pipe Support products perform a number of varied functions, which include:

1. Supporting and positively locating pipework over long spans.

2. Isolating the pipe from the mounting bolts and clamps to prevent fretting and corrosion.

3. Isolating dissimilar metals (e.g. between a pipe and a clamp) to prevent electrolytic corrosion.

4. Cater for movements in the pipe due to e.g. thermal expansion and contraction which might otherwise result in a build-up of stress in the pipe and potential rupture.

5. Maintaining pipe spacing of multiple pipe runs over long spans.

The JW reference number uniquely identifies each size of bolt. The suffix on the JW number is equal to the X dimension of the Pipe Grip (Pipe OD). There are two size ranges, based on different types of thin walled pipe:

JW 172 Series

Sizes based on stainless steel pipe outer diameters to BS3974 Part 1 1974

Rubber sleeve and pad color coded Black

JW 173 Series

Sizes based on Cu-Ni pipe outer diameters to BS2871 Part 2

Rubber sleeve and pad color coded Red